M393A2K43DB3-CWECQ Samsung 16GB 3200MHz PC4-25600 DDR4 SDRAM 288Pin Server. Brand New 3 Years Warranty

The Samsung M393A2K43DB3-CWECQ is a DDR4 SDRAM module designed for use in server environments. DDR4 SDRAM is the latest generation of synchronous dynamic random-access memory (SDRAM) technology, and it offers faster data transfer rates, lower power consumption, and increased reliability compared to its predecessor, DDR3 SDRAM.

The M393A2K43DB3-CWECQ module has a capacity of 16GB and operates at a clock speed of 3200MHz, making it ideal for use in high-performance computing applications. It uses a 288-pin form factor and is designed to be compatible with systems that support DDR4 memory.

One of the key features of the M393A2K43DB3-CWECQ module is its error-correcting code (ECC) technology, which is designed to detect and correct errors in data as it is being transferred between the memory and the processor. This makes it particularly suitable for use in server environments where data integrity is of the utmost importance.

The M393A2K43DB3-CWECQ module also supports a range of advanced memory technologies, including dual in-line memory module (DIMM) and quad in-line memory module (QDIMM) configurations, as well as advanced signal processing (ASP) and on-die termination (ODT) technologies.

Compatibility and performance

The Samsung M393A2K43DB3-CWECQ DDR4 SDRAM module is designed to be compatible with a wide range of server systems that support DDR4 memory. It uses a 288-pin form factor and operates at a clock speed of 3200MHz, which is a relatively high clock speed for DDR4 memory. However, it is important to note that the compatibility and performance of the module may vary depending on the specific server system in which it is installed.

To ensure optimal compatibility and performance, it is recommended that the M393A2K43DB3-CWECQ module be installed in a server system that supports DDR4 memory at a clock speed of 3200MHz. The server system should also be compatible with ECC memory modules, as the M393A2K43DB3-CWECQ module uses ECC technology to ensure data integrity.

In terms of performance, the M393A2K43DB3-CWECQ module offers fast data transfer rates and low latency, making it ideal for use in data-intensive applications that require high-speed memory access. The module also supports advanced memory technologies such as ASP and ODT, which help to improve signal quality and reduce signal noise, further enhancing performance.

It is important to note that the performance of the M393A2K43DB3-CWECQ module may also be influenced by other factors, such as the overall system configuration and the specific application being used. Therefore, it is important to thoroughly test the module in the target system to ensure optimal performance and compatibility.

Installation and configuration

Installing and configuring the Samsung M393A2K43DB3-CWECQ DDR4 SDRAM module is a straightforward process that can be completed by following a few simple steps. Here are the basic steps to install and configure the module:

• Turn off the server and unplug it from the power source.
• Locate the memory slots on the motherboard where the M393A2K43DB3-CWECQ module will be installed. The slots may be labeled with numbers or other identifiers to indicate their location.
• Open the server case and locate the memory slots on the motherboard. Ensure that the memory slots are free of dust and debris before installing the module.
• Press down on the tabs on either side of the memory slot to release any existing memory modules that may be installed. Gently remove the existing memory module(s) from the slot(s).
• Align the notch on the M393A2K43DB3-CWECQ module with the notch on the memory slot. Insert the module into the slot at a slight angle, ensuring that the module is fully seated and the locking tabs on either side of the slot click into place.
• Repeat the installation process for any additional M393A2K43DB3-CWECQ modules that need to be installed.
• Close the server case and reconnect the power source to the server.
• Power on the server and access the BIOS to configure the memory settings. The BIOS settings may vary depending on the specific server system, but the memory settings should be located under the “Advanced” or “Memory” tab.
• Configure the memory settings according to the manufacturer’s specifications. This may include setting the clock speed, adjusting the memory timing, and enabling ECC support if necessary.
• Save the BIOS settings and exit. The server will reboot and the M393A2K43DB3-CWECQ module(s) will be ready for use.