Description
Introduction to HPE 64GB 2666Mhz DDR4 RAM
The Introduction to HPE 64GB 2666Mhz Pc4-21300 DDR4 RAM section would provide an overview of the product and its key features. It would explain what the product is, what it is used for, and the benefits of using it.
The HPE 64GB 2666Mhz Pc4-21300 DDR4 RAM is a high-performance memory module designed for use in servers and other high-end computing systems. It has a capacity of 64GB, which means it can store a large amount of data, and a speed of 2666Mhz, which means it can transfer data at a high rate. The Pc4-21300 and CL-19 specifications indicate the RAM’s operating parameters.
One of the key features of this RAM is that it is ECC (Error Correcting Code) Registered. This means that it has built-in error correction capabilities, which can help prevent data corruption and improve the reliability of the system.
Benefits of Using ECC Registered RAM in Servers
The Benefits of Using ECC Registered DDR4 RAM in Servers section would explain the advantages of using Error Correcting Code (ECC) memory in server systems, specifically the HPE 64GB 2666Mhz Pc4-21300 Cl-19 Ecc Registered DDR4 SDRAM 288-Pin Ram.
One of the main benefits of ECC memory is that it can detect and correct single-bit errors that may occur in the data stored in the RAM. This helps to ensure the integrity of the data, and can prevent potential data corruption or system crashes.
ECC memory also improves the overall reliability of the system by detecting and correcting errors that may occur in the memory. This can help to minimize downtime and improve the availability of the server.
Another benefit of using ECC memory is that it can help to improve the performance of the system by detecting and correcting errors before they can cause problems. This can help to ensure that the system is running at optimal performance levels.
In addition, ECC memory can also help to improve the security of the system by providing an additional layer of protection against data breaches and other security threats.
Power Consumption and Thermal Management
The Power Consumption and Thermal Management section would explain how the HPE 64GB 2666Mhz Pc4-21300 Cl-19 Ecc Registered DDR4 SDRAM 288-Pin Ram, affects the power consumption and thermal management of a server system.
DDR4 RAM, in general, consumes less power compared to DDR3 and earlier versions. The HPE 64GB 2666Mhz Pc4-21300 Cl-19 Ecc Registered DDR4 SDRAM 288-Pin Ram also has a lower voltage rating of 1.2V which reduces the power consumption.
However, as the capacity of the RAM increases, the power consumption also increases. The HPE 64GB 2666Mhz Pc4-21300 Cl-19 Ecc Registered DDR4 SDRAM 288-Pin Ram’s 64GB capacity may consume more power than lower capacity options.
Thermal management is also an important aspect to consider when using high-performance memory like the HPE 64GB 2666Mhz Pc4-21300 Cl-19 Ecc Registered DDR4 SDRAM 288-Pin Ram. As the memory module generates heat during operation, it is important to have adequate cooling in place to dissipate the heat.
The server system’s thermal management solution such as fans, heatsinks, and liquid cooling, should be able to handle the increased thermal load caused by the high-performance memory. It is also recommended to monitor the temperature of the memory and other components to ensure that they are operating within safe temperature limits.
General Information
- Brand: HPE
- Manufacturer Part Number: P05642-1A1
- Type: Memory (RAM)
- Sub-Type: PC4-21300
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 64GB
- Bus Speed: 2666mhz DDR4-2666/PC4-21300
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl19
- Features: 4rx4
Compatibility
- HPE Proliant Dl325 Gen10
- HPE Dl325 Gen10 Performance
- HPE Dl385 Gen10
- HPE Dl385 Gen10 Base
- HPE Dl385 Gen10 High-Performance
- HPE Dl385 Gen10 Solution
