Description
Energy Efficiency and Power Consumption
The HPE P04560-K21 480GB SATA 6GBPS Read Intensive 2.5-inch Internal solid state drive is designed to be energy efficient and consume less power compared to traditional hard disk drives. The SSD uses NAND flash memory technology that does not require any mechanical components to operate, which in turn reduces the amount of energy required to run the drive.
In terms of power consumption, the HPE P04560-K21 SSD consumes an average of 3 watts of power during operation, which is significantly lower than traditional hard disk drives that can consume up to 8 watts of power. The lower power consumption not only reduces the energy bills for the user, but it also helps in reducing the overall carbon footprint of the system.
Additionally, the HPE P04560-K21 SSD comes with advanced power management features that help in further reducing power consumption. The SSD can automatically adjust the power consumption based on the workload and can enter into a low power state when the workload is low, which further reduces the power consumption of the drive.
Installation and Setup Process
The installation and setup process of HPE P04560-K21 480GB SATA 6GBPS Read Intensive 2.5-inch Internal solid state drive is relatively straightforward. Here are the steps you need to follow:
- Power off your device: Before starting the installation, ensure that the device is powered off and unplugged from the electrical socket.
- Locate the internal drive bay: Depending on the device, you may need to remove the back panel or access the internal drive bay. Refer to your device’s user manual for instructions on locating the drive bay.
- Mount the HPE P04560-K21 SSD: Once you have accessed the internal drive bay, carefully insert the HPE P04560-K21 SSD into the drive slot. Make sure that the SSD is properly aligned with the connector pins and then secure it in place with screws or clips.
- Reassemble the device: Once you have installed the HPE P04560-K21 SSD, reattach the back panel or reassemble the device according to the user manual’s instructions.
- Power on the device: After reassembling the device, plug it in and power it on.
- Configure the HPE P04560-K21 SSD: Depending on your device’s operating system, you may need to configure the HPE P04560-K21 SSD before it can be used. Follow the instructions provided in the user manual to configure the SSD.
- Verify the HPE P04560-K21 SSD is working: Once the configuration is complete, verify that the HPE P04560-K21 SSD is working correctly by running diagnostic software or checking the device’s storage settings.
Environmental Sustainability Features
Environmental sustainability features of the HPE P04560-K21 480GB SATA 6GBPS Read Intensive 2.5-inch Internal solid state drive refer to the efforts taken by HPE to reduce the environmental impact of the product during its life cycle, from manufacturing to disposal.
One of the main features of HPE P04560-K21 SSD is its low power consumption, which not only reduces energy costs for users but also contributes to reducing carbon emissions. The SSD also has a long lifespan and high endurance, which means that it can be used for a longer time and does not need to be replaced as frequently, resulting in less waste.
HPE has also implemented sustainable manufacturing practices to reduce the environmental impact of the production process. For example, the company uses recycled materials and has reduced the amount of hazardous substances used in the manufacturing of the product. HPE also provides customers with end-of-life options for the product, including responsible disposal and recycling, in order to minimize the environmental impact of the product at the end of its life.
Product Information
- Manufacture: HPE
- MPN: P04560-K21
- Type: Solid State Drive – Hot-Swap
- SSD Type: SATA 6GBPS
- SKU: P04560-K21
Technical Information
- Capacity: 480 GB
- Form Factor: 2.5 inch SFF
- Interface: SATA 6GBPS
- Workload Type: Read Intensive
- Carrier Type: Smart Carrier (SC)
- NAND Flash Memory Type: Triple-level cell (TLC)
- Connection Type: Single Port
- Plug Type: Hot Plug
- Features: Digitally Signed Firmware
- Bundled with: HPE Smart Drive Carrier
Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility
- HPE Apollo Series: 4200 Gen9 for Google (2.5inch)
- HPE ProLiant BL Series: BL660c Gen9 (2.5inch), DL180 Gen10 (2.5inch)
- HPE ProLiant DL Series: DL180 Gen10 Entry (2.5inch), DL180 Gen10 SMB (2.5inch), DL20 Gen10 (2.5inch), DL20 Gen10 Entry (2.5inch), DL20 Gen10 Performance (2.5inch), DL20 Gen10 solution (2.5inch), DL325 Gen10 Base (2.5inch), DL325 Gen10 Solution (2.5inch), DL360 Gen9 (2.5inch), DL360 Gen9 CMS (2.5inch), DL360 Gen9 Performance (2.5inch), DL360 Gen9 Special Server (2.5inch), DL380 Gen10 (2.5inch), DL380 Gen10 All Flash Server for Datera (2.5inch), DL380 Gen10 Base (2.5inch), DL380 Gen10 Entry (2.5inch), DL380 Gen10 Entry SMB (2.5inch), DL380 Gen10 for Cohesity DataPlatform (2.5inch), DL380 Gen10 High Performance (2.5inch), DL380 Gen10 Hybrid Server for Datera (2.5inch)
- HPE Synergy Series 680 Gen9 4S-EX Base Compute Module (2.5inch), 680 Gen9 4S-EX Compute Module (2.5inch), 680 Gen9 4S-EX Performance Compute Module (2.5inch)
