Description
Overview of the HPE 128GB 2133MHz DDR4 SDRAM
The HPE 128GB 2133MHz DDR4 SDRAM is a high-performance memory module designed for use in HPE servers and workstations. With a capacity of 128GB, it is ideal for use in data-intensive applications such as virtualization, databases, and large-scale data processing. The module operates at a speed of 2133MHz, which is the fastest speed currently available for DDR4 memory. This allows for faster data transfer rates and improved overall system performance. The module also features ECC (Error Correction Code) technology, which helps to detect and correct errors in the data, ensuring reliable and accurate data storage and retrieval. The 288-pin form factor of the module is compatible with HPE servers and workstations, making it easy to install and use. Additionally, it also features CL15 latency rating which determines the delay between a command and the data being available, lower the latency means, less delay and better performance.
ECC Technology and Benefits
ECC (Error Correction Code) technology is a type of error-detecting and correction method used in memory modules, such as the HPE 128GB 2133MHz DDR4 SDRAM. It works by adding extra bits to the data stored in memory, called “ECC bits,” which are used to detect and correct errors in the data.
The benefits of ECC technology include:
- Improved data integrity: ECC technology detects and corrects single-bit errors in the data, ensuring that the data stored in memory is accurate and reliable.
- Increased system uptime: By detecting and correcting errors in the data, ECC technology helps to prevent system crashes and other issues that can lead to downtime.
- Enhanced security: ECC technology can detect and correct errors caused by environmental factors such as cosmic rays, which can cause bit flips in memory.
- Better performance: ECC memory can help to improve system performance, as it allows the system to detect and correct errors in real-time, without the need to stop and check for errors.
- Cost-effective: ECC memory is a cost-effective solution for ensuring the integrity of data stored in memory, as it is able to detect and correct errors without the need for additional hardware or software.
Installation and Setup Guide
Installation and setup of the HPE 128GB 2133MHz DDR4 SDRAM involves physically installing the module into the appropriate slot on the motherboard of the HPE server or workstation, and then configuring the system’s BIOS or UEFI firmware to recognize and properly utilize the new memory.
The process typically involves the following steps:
- Power off the system and unplug all cables
- Open the system case and locate the memory slots on the motherboard
- Carefully insert the memory module into the appropriate slot, making sure to align the notch on the module with the key on the slot
- Gently press down on the module until it clicks into place
- Close the system case and reconnect all cables
- Power on the system and enter the BIOS or UEFI firmware settings
- Locate the memory configuration options and ensure that the system recognizes the new memory module
- Save the changes and exit the BIOS or UEFI firmware settings
- Boot the system into the operating system and verify that the new memory module is recognized and being utilized correctly.
It’s important to follow the instructions of the motherboard and the server or workstation manual to make sure that the installation is done safely and correctly. Additionally, it is important to check the maximum memory capacity that the server or workstation can handle, so you can avoid any issues.
General Information of this HPE 728629-128
- Brand Name: HPE
- Model Number or SKU# 728629-128
- Type: Memory (RAM)
- RAM Type: Pc4-17000
- Product Name: 128GB DDR4 SDRAM Memory Module
Technical Information about 128GB DDR4 Ram
- Storage Capacity: 128GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 4 X 32GB
- Bus Speed: 2133MHZ DDR4-2133/PC4-17000
- Data Integrity Check: Ecc
- Signal Processing: Registered , Dual Rank
- Cas Latency Timings: Cl15
- Platform Support: HPE Proliant Gan9 Server
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility of 128GB DDR4 Ram
- HPE Proliant Bl460c Gen9
- HPE Proliant Dl380 Gen9
- HPE Proliant Dl380p Gen9
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
