Description
Capacity and performance
Capacity and performance refer to the amount of data that can be stored on a hard disk drive (HDD) and the speed at which it can access and transfer that data. The 400-AHFM Dell 6TB 7.2K RPM Hard Disk Drive has the following specifications for capacity and performance:
- Capacity: The HDD has a total storage capacity of 6 terabytes (TB), which is equivalent to 6,000 gigabytes (GB) of data.
- Rotational speed: The HDD has a rotational speed of 7.2K RPM (revolutions per minute), which is considered to be a moderate speed for a hard drive.
- Data transfer rate: The HDD has a maximum data transfer rate of up to 600MB/s.
- Latency: The HDD has an average latency of 4.16 ms.
- Buffer size: The HDD has a buffer size of 128MB.
It’s important to note that the performance of a hard drive can be affected by several factors, such as the interface and connectivity, the workload, and the operating conditions. The performance and capacity of this drive may also vary depending on the specific use case and usage pattern.
Rotational speed and latency
Rotational speed and latency refer to the speed at which a hard disk drive (HDD) spins and the amount of time it takes for the drive to access data.
- Rotational speed: The 400-AHFM Dell 6TB 7.2K RPM Hard Disk Drive has a rotational speed of 7.2K RPM (revolutions per minute). This means that the disk inside the drive spins at 7,200 revolutions per minute. The rotational speed is an important factor in determining the performance of an HDD, as it directly affects the time it takes to access data stored on the drive. Generally, a higher rotational speed means faster data access times.
- Latency: The HDD has an average latency of 4.16 ms, which is the time it takes for the drive to access data after receiving a request. Latency is measured in milliseconds (ms) and is affected by the rotational speed of the drive, as well as other factors such as the position of the data on the disk and the interface used to connect the drive.
It’s important to note that the rotational speed and latency of an HDD can be affected by several factors, such as the workload and the operating conditions. Additionally, the value of rotational speed and latency may vary depending on the specific use case and usage pattern.
Design and construction
Design and construction is the process of creating and building structures, such as buildings, bridges, and infrastructure. The process typically involves several stages, including conceptual design, schematic design, design development, construction documents, and construction administration. It requires the collaboration of architects, engineers, construction managers, and other professionals to ensure that the project is safe, functional, and aesthetically pleasing. It also involves obtaining necessary permits, meeting building codes and zoning regulations, and managing the budget and schedule of the project.
General Information
- Manufacturer : Dell
- Manufacturer Part Number: XYRNV
- Dell Part Number : 400-AHFM
- Device Type : Hard Drive – Internal
Technical Information
- Storage Capacity: 6TB
- Spindle Speed : 7200 RPM
- Form Factor : 3.5 Inch
- Enclosure : Internal
- Interface Type : SAS-6GBPS
- Drive Transfer Rate: 600 MBS(External)
- Interfaces : 1 X Serial Attached SCSI
- Compatible Bays : 1 X Hot-Swap – 3.5
Compatibility
- Poweredge R210
- Poweredge R310
- Poweredge R320
- Poweredge R410
- Poweredge R415
- Poweredge R420
- Poweredge R510
- Poweredge R515
- Poweredge R520
- Poweredge R710
- Poweredge R720
- Poweredge R720XD
- Poweredge T310
- Poweredge T320
- Poweredge T410
- Poweredge T420
- Poweredge T610
- Poweredge T620
- Poweredge T710
- Powervault DL2200
- Powervault MD1200
- Powervault MD3200
- Powervault MD3200I
- Powervault MD3600F
- Powervault MD3600I
- Powervault NX200
- Powervault NX300
- Powervault NX3000
- Powervault NX3100
