For bulk orders contact sales via email sales@allhdd.com, via chat, or call our toll-free number 1-800-675-5044.

331-4422 Dell 16GB 1333mhz PC3-10600 Ecc Registered DDR3 SDRAM 240-Pin Ram | New Bulk Pack

Name: 331-4422 Dell 16GB 1333mhz PC3-10600 Ecc Registered DDR3 SDRAM 240-Pin Ram | New Bulk Pack
SKU: 331-4422
Availability: InStock

$30.00

331-4422 16GB 1X16GB 1333mhz PC3-10600 Cl9 Ecc Registered Dual Rank Low Voltage DDR3 SDRAM 240-Pin Dimm Genuine Memory Module Poweredge for Server | Made by Dell | New Bulk Pack

1 in stock

SKU: 331-4422 Category: 16GB

Description

Suitable for Workstations and Servers

The 331-4422 Dell 16GB PC3-10600 ECC DDR3 SDRAM RAM is suitable for use in workstations and servers. Workstations and servers are typically used for demanding tasks that require high performance and reliability, such as video editing, 3D rendering, scientific computing, and database management.

The use of ECC (Error-Correcting Code) in this memory module helps to improve system stability and prevent data loss, which is particularly important for critical applications running on workstations and servers.

The 16GB capacity of this memory module also makes it suitable for demanding workloads that require large amounts of memory, such as running multiple virtual machines or processing large data sets.

In addition, the registered memory technology used in this module helps to reduce the load on the memory controller, allowing for more memory modules to be installed on a single motherboard. This can be particularly useful in server environments where large amounts of memory are required.

Installation and Configuration Guidelines

Here are some general installation and configuration guidelines for the 331-4422 Dell 16GB PC3-10600 ECC DDR3 SDRAM RAM:

Ensure that the memory module is compatible with the motherboard and CPU of the system. Check the system specifications and the manufacturer’s guidelines to confirm compatibility.
Ensure that the system is powered off and unplugged before installing or removing the memory module.
Locate the 240-pin DIMM slot on the motherboard where the memory module will be installed.
Gently press down on the levers on either side of the DIMM slot to release any existing memory module.
Align the notches on the bottom of the memory module with the notches on the DIMM slot.
Firmly press down on the memory module until it clicks into place. Ensure that the levers on either side of the DIMM slot are secured in the upright position.
Power on the system and enter the BIOS to confirm that the memory module has been detected and is operating correctly.
Configure the BIOS settings to ensure that the system is using the correct memory settings for the installed memory module. Check the manufacturer’s guidelines for recommended settings.
Run a memory diagnostic test to confirm that the memory module is functioning correctly.

It’s important to follow the manufacturer’s guidelines for installation and configuration to ensure optimal performance and compatibility. In addition, if you are not familiar with computer hardware installation, it’s recommended to seek the assistance of a qualified technician to install the memory module.

Performance Benchmarking

Performance benchmarking is a process of comparing the performance of an organization, process, or system against industry standards or best practices. The goal of performance benchmarking is to identify areas where improvements can be made in order to increase efficiency, reduce costs, and enhance overall performance.

Benchmarking can be done in a variety of ways, including:

Internal benchmarking: Comparing the performance of different departments or units within an organization.
Competitive benchmarking: Comparing the performance of one organization against its direct competitors.
Functional benchmarking: Comparing the performance of a particular function, such as marketing or finance, across different organizations.
Generic benchmarking: Comparing the performance of an organization against industry standards or best practices.

The process of performance benchmarking typically involves the following steps:

Defining the objectives and scope of the benchmarking study.
Identifying the key performance indicators (KPIs) that will be used to measure performance.
Collecting data on the KPIs from the organization and/or external sources.
Analyzing the data to identify areas of strength and weakness.
Comparing the organization’s performance against benchmarks and best practices.
Identifying opportunities for improvement and developing action plans to address them.
Implementing the action plans and monitoring progress.

Performance benchmarking is a valuable tool for organizations looking to improve their performance and stay competitive in their industry. By identifying areas of weakness and implementing best practices, organizations can increase efficiency, reduce costs, and enhance customer satisfaction.

General Information