Description
Features and Benefits of the PWR-2811-AC-IP
The PWR-2811-AC-IP Cisco AC Router Power Supply provides the following features and benefits:
- High Reliability: The power supply is designed to provide reliable power to the router, ensuring that the network is available and operational at all times.
- Increased Availability: The redundant power supply provides increased availability and reliability, as there is always a backup power supply available in case of a failure.
- Wide Input Voltage Range: The power supply has a wide input voltage range of 100-240V AC, allowing it to be used in a variety of global locations.
- Increased Power Output: The power supply provides increased power output, allowing it to power the router and other connected devices.
- Easy Installation: The power supply is easy to install, reducing the time and cost required to set up the network.
- Cost-Effective: The power supply is a cost-effective solution for powering the router, as it is designed to provide reliable power at an affordable price.
By using the PWR-2811-AC-IP Cisco AC Router Power Supply, organizations can ensure that their network is reliable and available at all times, reducing the risk of downtime and data loss.
Installation and Configuration of the PWR-2811-AC-IP
The PWR-2811-AC-IP Cisco AC Router Power Supply can be installed and configured as follows:
- Prepare the Router: Before installing the power supply, ensure that the router is properly prepared, with all cables disconnected and the router turned off.
- Install the Power Supply: Locate the power supply bay on the router and install the PWR-2811-AC-IP Cisco AC Router Power Supply by aligning the connectors and gently pushing the power supply into place.
- Connect the Power Cord: Connect the power cord to the power supply and to a power source.
- Turn on the Router: Turn on the router and allow it to fully boot up.
- Verify the Power Supply Status: Verify the status of the power supply by using the show environment command in the Cisco IOS software. The power supply status should be shown as “OK”.
- Configure Power Settings: Configure the power settings for the router, if necessary. This can be done through the Cisco IOS software or through a network management platform such as Cisco Prime Infrastructure or Cisco DCNM.
It is important to follow the manufacturer’s instructions when installing and configuring the power supply, as improper installation or configuration can result in damage to the power supply or the router. If there are any issues or questions, it is recommended to consult the manufacturer’s documentation or consult a Cisco representative for further assistance.
Monitoring and Management of the PWR-2811-AC-IP
The PWR-2811-AC-IP Cisco AC Router Power Supply can be monitored and managed through the following methods:
- Cisco IOS Software: The power supply can be monitored and managed through the Cisco IOS software, which provides real-time information about the power supply status, voltage, current, and temperature.
- Simple Network Management Protocol (SNMP): The power supply can be monitored and managed through the Simple Network Management Protocol (SNMP), which provides real-time information about the power supply status, voltage, current, and temperature, as well as alerts for any potential issues.
- Cisco Prime Infrastructure: The power supply can be monitored and managed through the Cisco Prime Infrastructure network management platform, which provides a centralized interface for monitoring and managing multiple network devices, including power supplies.
- Cisco DCNM (Data Center Network Manager): The power supply can be monitored and managed through the Cisco DCNM network management platform, which provides a centralized interface for monitoring and managing data center network devices, including power supplies.
By monitoring and managing the power supply, administrators can proactively identify any potential issues and resolve them before they cause a disruption in service. This helps to ensure that the network remains highly available and reliable, reducing the risk of downtime and data loss.
Key Information for this Cisco PWR-2811-AC-IP
- Manufacturer: Cisco
- Part Number or SKU # PWR-2811-AC-IP
- Product Name: Integrated Services Router AC Power Supply
- Product Type: Proprietary Power Supply
Power Description of Integrated Services Router
- Input Voltage Type : AC
Miscellaneous
- Compatibility-
- Cisco 2811 Integrated Services Router
