Description
Security Features of Wireless Access Points
The Cisco Aironet 2702I is a high-performance wireless access point designed to provide reliable and secure wireless network connectivity for businesses and organizations. The access point supports the latest Wi-Fi standards, including 802.11ac, and offers a range of security features to protect against unauthorized access and data breaches.
Some of the key security features of the AIR-CAP2702I-AK910 include:
- WPA2 Enterprise Authentication: This feature provides strong authentication by requiring users to enter a username and password. It uses a RADIUS server for authentication, which provides centralized management and access control.
- MAC Address Filtering: This feature allows the network administrator to specify a list of MAC addresses that are allowed to access the network. Any device that is not on the list is denied access.
- VLAN Support: This feature allows the network administrator to create separate virtual LANs (VLANs) for different groups of users or devices. This provides an additional layer of security by segregating network traffic and preventing unauthorized access.
- Rogue Access Point Detection: This feature allows the access point to detect and identify rogue access points that are not authorized on the network. The administrator can then take appropriate action to remove the rogue access point and prevent unauthorized access.
- Encryption: The Cisco Aironet 2702I supports multiple encryption methods, including Advanced Encryption Standard (AES), Wired Equivalent Privacy (WEP), and Temporal Key Integrity Protocol (TKIP). These encryption methods provide secure transmission of data over the wireless network.
Managing and Monitoring Wireless
The Cisco Aironet 2702I is a high-performance wireless access point designed for use in large enterprises and organizations. The AIR-CAP2702I-AK910 model is a kit that includes a single access point and a variety of mounting and power supply options.
Once the access point is installed and powered on, it can be configured and managed using various tools and interfaces. The device can be configured through a web-based interface or via a command line interface using a console cable. The administrator can configure wireless network settings such as SSID, security options, and channel selection.
The access point can also be integrated with a central wireless LAN controller for centralized management and monitoring of multiple access points. The controller can provide features such as automatic RF management, load balancing, and rogue access point detection. The Cisco Prime Infrastructure software can be used to manage the entire wireless network from a single console, including monitoring network performance and troubleshooting issues.
The Aironet 2702I provides high-speed wireless connectivity, supporting data rates up to 1.3Gbps and providing reliable coverage and performance in demanding environments. The device also supports various security options such as WPA2 encryption and 802.1X authentication.
Troubleshooting Wireless Access Points
The Cisco Aironet 2702I is a high-performance wireless access point that provides reliable and fast connectivity for enterprise networks. However, in the event of connectivity issues or other problems, troubleshooting may be necessary. Here are some troubleshooting steps for the AIR-CAP2702I-AK910:
- Check the physical connections: Ensure that the access point is properly connected to power and network cables. If using PoE, make sure the switch or injector is functioning properly.
- Check the network configuration: Verify that the access point is configured correctly on the network, including IP address, subnet mask, and default gateway settings. Ensure that the wireless network settings are also configured correctly.
- Check for interference: Wi-Fi signals can be disrupted by other wireless devices or physical obstructions. Use a Wi-Fi analyzer to check for signal interference, and adjust the channel or power settings as needed.
- Check for firmware updates: Make sure the access point is running the latest firmware version. Check the Cisco website for firmware updates and installation instructions.
- Reset the access point: If all else fails, try resetting the access point to factory settings. This will erase all settings and configurations, so make sure to backup any important data before proceeding.
- Contact technical support: If the issue persists after troubleshooting, contact Cisco technical support for further assistance.
By following these troubleshooting steps, you can ensure that the AIR-CAP2702I-AK910 is functioning properly and providing the best possible performance for your wireless network.
Specification
- Manufacturer Cisco Systems, Inc
- Type: Networking
- Sub-Type: Wireless 1.3GBPS
- Manufacturer Part Number AIR-CAP2702I-AK910
- Brand Name Cisco
- Product Line Aironet
- Product Series 2700
- Product Model 2702I
- Product Name Aironet 2702I Wireless Access Point
- Packaged Quantity 10
- Product Type Wireless Access Point
- Product UPC 882658622687
Technical Information
- Wireless LAN Standard IEEE 802.11ac
- ISM Band Yes
- UNII Band Yes
- ISM Minimum Frequency 2.41 GHz
- ISM Maximum Frequency 2.46 GHz
- UNII Minimum Frequency 5.18 GHz
- UNII Maximum Frequency 5.83 GHz
- Antenna Gain-
- 4 dBi
- 6 dBi
- Antenna Type Omnidirectional Antenna
- Wireless Transmission Speed 1.27 Gbps
- Wireless Security-
- IEEE 802.11i
- WPA2
- WPA
- IEEE 802.1X
- AES
- TKIP
- EAP-TLS
- EAP-TTLS
- MSCHAPv2
- PEAP
- EAP-MSCHAPv2
- EAP-FAST
- PEAP v1
- EAP-GTC
- Features MIMO Technology
Interfaces/Ports
- Ethernet Port Yes
- Fast Ethernet Port Yes
- Gigabit Ethernet Port Yes
- 10Gigabit Ethernet Port No
- Number of Network (RJ-45) Ports 2
- Network (RJ-11) No
- PoE (RJ-45) Port No
- VGA No
- HDMI No
- Audio Line Out No
- Serial Port No
- USB: No
- Powerline: No
- Management Port: Yes
Power Description
- Power Source-
- AC Adapter
- PoE+
Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any “lead time required” item.
