Description
Key Features and Capabilities of Ethernet Switch
- High-speed performance: The Cisco UCS-SP7-INFR-FI48 offers 48 Gigabit Ethernet ports, providing high-speed data transfer and low-latency performance for demanding applications.
- Built-in redundancy: The switch includes built-in redundancy features, such as dual hot-swappable power supplies and fans, to ensure maximum uptime and availability.
- Virtualization support: The Cisco UCS-SP7-INFR-FI48 is fully integrated with Cisco UCS Manager, allowing for easy management and provisioning of virtualized environments.
- Advanced security features: The switch includes advanced security features, such as access control lists (ACLs) and Quality of Service (QoS) to help protect against network threats and prioritize network traffic.
- Energy efficient: The switch is designed to be energy efficient, with features such as Energy Efficient Ethernet (EEE) to help reduce power consumption and lower energy costs.
- Scalability: The Cisco UCS-SP7-INFR-FI48 can be easily expanded with additional switches, allowing for scalability as your network grows.
- Software-defined networking (SDN) support: The switch supports OpenFlow and other SDN protocols, allowing for greater network programmability and automation.
- Easy management: The switch can be easily managed and configured through a web-based interface, making it a great option for both IT professionals and non-technical users.
Managing and Configuring
Managing and configuring the Cisco UCS-SP7-INFR-FI48 UCS 6248UP 48 Ports Interconnect Switch is relatively simple and straightforward. The switch can be managed through a web interface or through Cisco’s command-line interface (CLI).
Web Interface: To access the web interface, you will need to connect to the switch’s IP address using a web browser. Once logged in, you will have access to various configuration options, including VLANs, port-channeling, and Quality of Service (QoS) settings. The web interface is easy to navigate and provides a graphical representation of the switch’s configuration, making it ideal for non-technical users.
Command-Line Interface (CLI): For more advanced users, the Cisco UCS-SP7-INFR-FI48 UCS 6248UP 48 Ports Interconnect Switch can be managed and configured through the CLI. To access the CLI, you will need to connect to the switch using a serial cable or Telnet/SSH. The CLI provides access to a wide range of configuration options and allows you to quickly make changes to the switch’s configuration.
In both ways, you can use the built-in security features of the switch, including access control lists (ACLs) and virtual LANs (VLANs), to improve network security and segmentation. Additionally, the switch supports advanced features such as Quality of Service (QoS) and link aggregation, allowing you to optimize network performance and increase bandwidth.
Installation and Configuration
The installation and configuration of the UCS-SP7-INFR-FI48 Cisco UCS 6248UP 48 Ports Ethernet Switch is a straightforward process that can be completed in a few simple steps. Below is an overview of the installation and configuration process:
- Unpack and inspect the switch: Upon receiving the switch, make sure to inspect the package for any visible damage. If there are no issues, remove the switch from the packaging and verify that all components are present.
- Rack-mount the switch: The UCS-SP7-INFR-FI48 switch is designed to be rack-mounted, so you’ll need to mount it in a rack before proceeding with the installation.
- Connect the power cables: Once the switch is securely mounted in the rack, connect the power cables to the switch and plug them into a power source.
- Connect the network cables: Next, connect the network cables to the switch’s ports and plug them into the network devices you wish to connect to the switch.
- Configure the switch: Now that the switch is physically connected to the network, you can begin configuring it. This can be done through the switch’s web interface or through the Cisco UCS Manager software.
- Configure the VLANs: To configure the VLANs, go to the VLAN Manager tab and create the VLANs you need. Assign the ports you want to be in those VLANs.
- Configure the port channels: To configure the port channels, go to the Port Channel Manager tab and create the port channels you need. Assign the ports you want to be in those port channels.
- Verify the configuration: Once you’ve completed the configuration, verify that the switch is functioning as expected by checking the switch’s status and monitoring its performance.
Main Specifications about this Cisco UCS-SP7-INFR-FI48
- Manufacture: Cisco
- Part Number or SKU# UCS-SP7-INFR-FI48
- Product Type: Managed Switch
Technical Information for 48 Ports Switch
- Total Number of Ports: 48
- Enclosure Type: Rack-Mountable 1U
- MAC Address Table Size: 32000 entries
- Jumbo Frame Support: 9216 bytes
- Remote Management Protocol: RMON
- Interfaces: 1 x 1000Base-T RJ-45 Management
- Expansion Slots: 1 (total) / 1 (free) x Expansion slot
Performance of Managed Switch
- Power Device: Internal Power Supply – Hot-Plug
- Throughput: 960 GBPS
- Installed Qty: 0 (installed) / 2 (max)
- Power Redundancy: Optional
- Power Redundancy Scheme: 1+1 (with optional power supply)
Dimensions & Weight of Rack Mountable Switch
- Width: 17.3 inch
- Depth: 30 inch
- Height : 1.7 inch