Description
Compatibility Storage Solutions
The HPE InfiniBand EDR Single-Port 100Gbps PCI Express 3.0 x8 841QSFP28 Network Adapter is compatible with a wide range of HPE storage solutions. Here are some examples of compatible storage solutions:
- HPE 3PAR StoreServ Storage: This is a high-performance storage solution that is designed for mission-critical applications. It offers features such as automated tiering, snapshots, and thin provisioning.
- HPE Nimble Storage: This is an all-flash array that provides high-speed performance and low latency. It is designed for demanding workloads such as virtualization, databases, and analytics.
- HPE StoreVirtual Storage: This is a software-defined storage solution that provides flexible, scalable, and cost-effective storage for virtualized environments. It offers features such as automated tiering, snapshots, and replication.
- HPE StoreOnce Backup: This is a backup and recovery solution that provides fast and efficient backup and recovery for data centers. It offers features such as deduplication, compression, and replication.
- HPE StoreEver Tape Storage: This is a tape storage solution that provides reliable and cost-effective long-term archiving. It offers features such as encryption, compression, and WORM (Write-Once-Read-Many) capability.
To ensure compatibility between the HPE InfiniBand EDR Adapter and your storage solution, it is important to check the compatibility list provided by HPE. This list contains information about the supported operating systems, firmware versions, and drivers for the adapter and the storage solution. It is also important to follow the installation and configuration instructions provided by HPE to ensure that the adapter is configured correctly for your storage solution.
InfiniBand EDR Adapter
An InfiniBand EDR Adapter is a type of network adapter that provides high-speed connectivity for data centers and high-performance computing environments. EDR stands for Enhanced Data Rate, which refers to the latest generation of InfiniBand technology that delivers faster data transfer rates than its predecessors.
The HPE InfiniBand EDR Single-Port 100Gbps PCI Express 3.0 x8 841QSFP28 Network Adapter is a specific type of InfiniBand EDR Adapter made by Hewlett Packard Enterprise. It offers a single-port interface with a data transfer rate of 100Gbps and uses the PCI Express 3.0 x8 interface to connect to a server or storage device.
InfiniBand is a high-speed interconnect technology that was originally developed for use in supercomputers and high-performance computing environments. It is designed to provide low-latency, high-bandwidth connectivity between servers, storage devices, and other components in a data center.
The InfiniBand EDR Adapter provides several benefits over traditional Ethernet adapters, including lower latency, higher bandwidth, and better scalability. It also supports advanced features such as remote direct memory access (RDMA) and quality of service (QoS), which are essential for demanding applications that require fast and reliable data transfer.
Installation Guide
The installation of the HPE InfiniBand EDR Adapter involves several steps that need to be followed carefully to ensure a successful installation. Here is a general installation guide for the HPE InfiniBand EDR Adapter:
- Verify that your server or storage device is compatible with the HPE InfiniBand EDR Adapter. You can check the compatibility list provided by HPE to make sure that your system is supported.
- Turn off the server or storage device and unplug it from the power source. Open the system chassis and locate an available PCI Express 3.0 x8 slot.
- Remove the cover of the PCI Express 3.0 x8 slot and align the HPE InfiniBand EDR Adapter with the slot. Gently push down on the adapter until it is firmly seated in the slot.
- Replace the cover of the PCI Express 3.0 x8 slot and close the system chassis.
- Power on the server or storage device and wait for the system to boot up.
- Install the appropriate device driver for the HPE InfiniBand EDR Adapter. You can download the driver from the HPE website or use the installation CD that comes with the adapter.
- Follow the instructions provided by the device driver installation program to install the driver. Make sure that you select the correct driver version for your operating system.
- Once the driver installation is complete, configure the HPE InfiniBand EDR Adapter settings according to your system requirements. You can use the HPE System Management Homepage or the HPE InfiniBand Manager software to configure the adapter.
- Test the HPE InfiniBand EDR Adapter to ensure that it is functioning correctly. You can use the HPE InfiniBand Diagnostic Tool or other diagnostic software to test the adapter.
Following these steps should ensure a successful installation of the HPE InfiniBand EDR Adapter. If you encounter any issues during the installation process, refer to the adapter’s documentation or contact HPE support for assistance.
General Information
- Manufacturer HPE
- Part Number or SKU#872725-B21
- Product Name InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter
- Product Type 100 Gigabit Ethernet Card
Interfaces/Ports
- Host Interface PCI Express 3.0 x16
- Total Number of Ports 1
I/O Expansions
- Expansion Slot Type QSFP
- Media & Performance
- Media Type Supported Optical Fiber
- Network & Communication
- Network Technology 100GBase-X
