Description
Overview of HMT84GR7MMR4A-G7 Hynix 32GB Memory
HMT84GR7MMR4A-G7 Hynix 32GB is a type of computer memory (RAM) called DDR3 SDRAM. It has a capacity of 32GB and operates at a speed of 1066MHz, with a PC3-8500 classification. The memory is quad-ranked and has Error Correction Code (ECC) technology, which helps to detect and correct data errors. It is also registered, meaning it has a buffer between the memory controller and the RAM modules, improving overall system stability. This memory is manufactured by Hynix, a South Korean electronics company, and is a genuine Hynix product.
Performance Evaluation and Benchmarking Results
Performance evaluation and benchmarking results for HMT84GR7MMR4A-G7 Hynix 32GB memory can vary based on the specific system and configuration it is used in. However, some general performance factors to consider are the memory’s speed, capacity, and error correction capabilities.
The 1066MHz speed of the HMT84GR7MMR4A-G7 Hynix 32GB memory is in line with standard DDR3 memory speeds and should provide a noticeable improvement in system performance compared to slower DDR3 memory. The quad-rank and ECC features also contribute to the memory’s stability and reliability.
Benchmarking results for this memory can be found by searching online for memory benchmarking tools and comparing the results to other DDR3 memory of similar specifications. It is important to note that benchmarking results can be influenced by a variety of factors, including the system configuration and the specific benchmarking tool used.
Installation and Compatibility Guidelines
To install HMT84GR7MMR4A-G7 Hynix 32GB memory, the following steps should be followed:
- Make sure the computer is turned off and unplugged.
- Open the computer case to access the memory slots.
- Identify an empty memory slot and release any locking mechanism.
- Align the notches on the memory module with the notches on the slot and gently insert the module until it clicks into place.
- Close the computer case and reconnect all cables.
- Power on the computer and enter the BIOS to verify that the memory has been detected and is functioning properly.
It is important to check the compatibility of the HMT84GR7MMR4A-G7 Hynix 32GB memory with your specific system before installing it. To do this, check the following:
- The memory’s specifications, such as speed, capacity, and form factor, match those supported by your system’s memory controller.
- The number of memory slots available on your motherboard is sufficient to accommodate the new memory.
- The voltage required by the memory is supported by your system’s memory controller.
If in doubt, consult the computer or motherboard manufacturer’s website or manual for compatibility information and guidelines. Installing incompatible memory can cause permanent damage to the system and void the warranty.
General information
- Manufacturer: sk hynix
- Manufacturer part number: hmt84gr7mmr4a-g7
- Product name: 32gb ddr3 sdram memory module
Technical information
- Storage capacity: 32gb
- Memory technology: ddr3 sdram
- Number of modules: 1 x 32gb
- Bus speed: 1066mhz ddr3-1066/pc3-8500
- Chips organization: x4
- Data integrity check: ecc
- Signal processing: registered
- Cas latency timings: cl7
- Voltage : 1.35v
- Features: quad rank
- Type: dram
