Description
Network Management and Security Features
The J8707-69001 HP Procurve Switch 5400zl 4p 10-GBE X2 Module provides various network management and security features that help network administrators to efficiently manage and secure their networks. Some of these features are:
- VLANs: The module supports VLANs (Virtual Local Area Networks) that allow network administrators to segment their networks into smaller logical networks. VLANs can improve network performance, security, and manageability.
- Quality of Service (QoS): The module supports QoS that allows network administrators to prioritize traffic based on its type, source, and destination. QoS helps to ensure that critical applications receive the necessary bandwidth and network resources to function properly.
- Access Control Lists (ACLs): The module supports ACLs that allow network administrators to control network access by filtering traffic based on various criteria such as source and destination IP addresses, protocols, and ports.
- SNMP: The module supports SNMP (Simple Network Management Protocol) that allows network administrators to monitor and manage network devices and resources from a centralized management system.
- RMON: The module supports RMON (Remote Monitoring) that allows network administrators to monitor network traffic and troubleshoot network problems remotely.
- Port Security: The module supports port security that allows network administrators to limit the number of devices that can connect to a switch port. This feature can prevent unauthorized access and reduce the risk of network attacks.
- DHCP Snooping: The module supports DHCP (Dynamic Host Configuration Protocol) snooping that prevents rogue DHCP servers from assigning IP addresses to network devices. This feature can improve network security and prevent network problems.
- IP Source Guard: The module supports IP Source Guard that helps to prevent IP spoofing attacks by verifying the source IP address of incoming packets.
- STP Root Guard: The module supports STP (Spanning Tree Protocol) Root Guard that prevents unauthorized switches from becoming the root bridge in a network.
- SSL: The module supports SSL (Secure Sockets Layer) that provides secure communication between network devices by encrypting data packets.
These network management and security features provide network administrators with the necessary tools to effectively manage and secure their networks.
Power Requirements and Consumption
The J8707-69001 HP Procurve Switch 5400zl 4p 10-GBE X2 Module requires a certain level of power to operate properly.
The module is designed to be powered by the switch it is installed in, which should provide sufficient power to operate the module and any connected devices. The power requirements of the module depend on various factors, including the number of devices connected to it and the amount of data being transmitted.
In terms of power consumption, the J8707-69001 module draws a maximum power of 40 watts when all four ports are in use at maximum capacity. However, the actual power consumption may be lower depending on the specific usage scenario.
It’s important to note that the switch which the J8707-69001 module is installed in must have a sufficient power supply to support the additional power requirements. If the switch does not have enough power, the J8707-69001 module may not function properly, or it may cause the entire switch to fail.
It’s recommended to refer to the product documentation to determine the specific power requirements of the switch and module, as well as any potential power supply upgrades that may be needed to support the module. Additionally, proper cable management and ventilation should be ensured to prevent the module from overheating, which may cause damage to the module or other connected devices.
Troubleshooting and Technical Support
When it comes to troubleshooting and technical support for the J8707-69001 HP Procurve Switch 5400zl 4p 10-GBE X2 Module, there are a few things to keep in mind.
First, it’s important to make sure that the module is properly installed and configured. Any issues with physical installation, configuration, or cabling can cause problems with data transfer speeds, performance, or reliability. Refer to the installation and configuration guides provided by HP for assistance with this.
If the module is installed correctly and still experiencing issues, the next step is to check the switch’s logs and diagnostics. This can help identify any errors, warning messages, or other issues that may be affecting the module’s performance. The switch’s logs can typically be accessed through a web interface or command line interface.
If the issue is still not resolved, it may be necessary to contact HP’s technical support team for assistance. HP offers a range of support options, including phone support, email support, and online chat support. Make sure to have all relevant information ready when contacting support, such as the switch’s serial number, software version, and any error messages or logs that may be available.
HP also offers a knowledge base and community forum where users can find answers to common questions, troubleshoot issues, and share their experiences with other users. This can be a useful resource for finding solutions to common problems or learning more about the module’s capabilities and features.
General Information
- Manufacturer: HP
- Model Number or SKU# J8707-69001
- Type: Networking
- Sub-Type: 4 Ports
- Device Type : Expansion Module
- Form Factor : Plug-In Module
Networking
- Connectivity Technology : Wired
- Data Link Protocol : 10 Gigabit Ethernet
- Data Transfer Rate : 10 GBPS
Expansion / Connectivity
- Expansion Slots Total (Free) : 4 ( 4 ) X X2
- Compatible Slots : 1 X Expansion Slot
