Description
Interface and Connector Type
The AFBR-89FECZ-HP1 HPE Synergy 100GBE/4x25GBE/4x32GBFC QSFP28 Transceiver is designed with a QSFP28 interface and connector type. QSFP28 (Quad Small Form-factor Pluggable 28) is a compact, hot-pluggable transceiver used for high-speed network applications. It has four channels that support data rates of up to 28 Gbps per channel, resulting in a total data rate of 100 Gbps.
The QSFP28 interface and connector type is commonly used in data center and high-performance computing environments where high-bandwidth connectivity is critical. It enables the deployment of high-speed Ethernet, InfiniBand, and Fibre Channel networks, among other protocols, and can be used in a variety of applications, including server-to-server connections, storage area networks (SANs), and network switches.
The AFBR-89FECZ-HP1 transceiver is compatible with HPE Synergy 12000 Frame and Fabric Modules, and is specifically designed for use in the HPE Synergy Composable Infrastructure. It supports a range of data rates, including 100 Gigabit Ethernet, 4x 25 Gigabit Ethernet, and 4x 32 Gigabit Fibre Channel, making it a versatile solution for high-speed data transmission in a range of network environments.
Quality of Service and Traffic Management
The AFBR-89FECZ-HP1 HPE Synergy 100GBE/4x25GBE/4x32GBFC QSFP28 Transceiver is a high-speed optical transceiver module designed for use in data center and enterprise environments. Quality of Service (QoS) and traffic management are important features of this transceiver that enable efficient data transmission and network performance. Here are some of the QoS and traffic management features of the AFBR-89FECZ-HP1:
- Bandwidth allocation: The AFBR-89FECZ-HP1 supports bandwidth allocation, which enables network administrators to prioritize traffic and allocate bandwidth based on the needs of the network. This feature ensures that mission-critical traffic is given priority over less important traffic.
- Traffic shaping: Traffic shaping is a traffic management technique that can be used to manage bandwidth usage and ensure that network resources are used efficiently. The AFBR-89FECZ-HP1 supports traffic shaping, which enables network administrators to control the flow of traffic and ensure that bandwidth is used in the most efficient manner.
- Quality of Service (QoS): The AFBR-89FECZ-HP1 supports QoS, which is a set of technologies and techniques that enable network administrators to prioritize traffic and ensure that critical applications receive the necessary network resources. QoS can be used to ensure that voice and video traffic is given priority over less important traffic.
- Virtual LAN (VLAN) tagging: VLAN tagging is a feature that enables network administrators to separate traffic into different virtual LANs, which can be used to prioritize traffic and improve network performance. The AFBR-89FECZ-HP1 supports VLAN tagging, which enables network administrators to separate traffic and prioritize it based on the needs of the network.
- Jumbo frame support: The AFBR-89FECZ-HP1 supports jumbo frames, which are frames that exceed the standard Ethernet frame size of 1518 bytes. Jumbo frames can be used to reduce network overhead and improve network performance.
Installation and Configuration
The installation and configuration process for the AFBR-89FECZ-HP1 HPE Synergy 100GBE/4x25GBE/4x32GBFC QSFP28 Transceiver involves the following steps:
- Ensure that the transceiver is compatible with the device or equipment you are using it with. Check the device specifications to confirm that it supports a QSFP28 interface and is compatible with the data rates supported by the transceiver.
- Power off the device or equipment that the transceiver will be installed in, and disconnect it from the power source.
- Locate the QSFP28 port on the device or equipment, and remove the protective dust covers from the port.
- Carefully insert the AFBR-89FECZ-HP1 transceiver into the QSFP28 port. Make sure that it is aligned properly with the port, and gently push it in until it clicks into place.
- Connect the network cables to the transceiver. Depending on the data rate you are using, you may need to use breakout cables to connect to multiple devices.
- Power on the device or equipment, and allow it to boot up. The transceiver should be detected automatically, and the device should configure itself to use the new interface.
- If necessary, configure the network settings for the new interface, such as IP address, subnet mask, and default gateway. This will depend on the specific device or equipment you are using.
- Test the new interface to ensure that it is working properly. You can do this by pinging other devices on the network, running network diagnostic tools, or transferring data between devices.
- If you encounter any issues or problems during the installation or configuration process, consult the documentation for the device or equipment, or contact the manufacturer for assistance.
General Information
- Manufacturer: HPE
- MPN: AFBR-89FECZ-HP1
- Type: Networking
- Transceiver Type: 100 Gigabit
Key Features
- Device Type : Qsfp28 Transceiver Module
- Form Factor : Plug-in Module
Performance
- Connectivity Technology : Wired
- Cabling Type : 100gbase-sr4
- Data Link Protocol : 100 Gigabit Ethernet, 25 Gigabit Lan, 32gb Fibre Channel
- Data Transfer Rate : 100 Gbps
- Optical Wave Length : 850 Nm
- Max Transfer Distance : 328 Ft
Expansion / Connectivity
- Interfaces : Ethernet 100gbase-sr4 – Mpo Multi-mode
