Description
Product Description
The 00NA306 IBM 1.8TB 10K RPM SAS 12GBPS Hot Slim Line Hard Drive is a high-performance storage solution designed for use in enterprise-level server and storage systems. It features a 1.8TB storage capacity, allowing for large amounts of data to be stored and accessed quickly. The hard drive has a rotational speed of 10,000 RPM and uses SAS (Serial Attached SCSI) interface with 12 Gbps data transfer rate for fast data transfer.
The Hot-plug design allows for easy installation and replacement, minimizing downtime. The slimline form factor allows for it to be used in space-constrained environments.
Compatibility
The IBM 00NA306 1.8TB 10K RPM SAS 12GBPS Hot Slim Line Hard Drive is compatible with servers and storage systems that have a SAS 12 Gbps interface and support the “Hot Slim Line” form factor. SAS (Serial Attached SCSI) is a type of interface that is commonly used in enterprise-level servers and storage systems, and provides high-speed data transfer rates and improved reliability compared to SATA interfaces.
This drive is also designed for specific drive bay or enclosure, therefore it is important to check the compatibility of the drive bay or enclosure with the hard drive before installing it. It is also important to check for the firmware compatibility of the hard drive with the device, as some devices may require a firmware update to support the hard drive.
It is always recommended to check with the manufacturer of the server or storage system to ensure compatibility before purchasing a hard drive. Additionally, you can check the compatibility list provided by the manufacturer of the hard drive.
Installation Instructions
To install the IBM 00NA306 1.8TB 10K RPM SAS 12GBPS Hot Slim Line Hard Drive, follow these steps:
- Make sure that the server or storage system is powered off and unplugged from the electrical outlet.
- Open the server or storage system and locate the drive bay where the new hard drive will be installed.
- Carefully remove the drive bay cover or any other enclosure that might be in place.
- Carefully slide the new hard drive into the drive bay, making sure that the connectors on the drive align with the connectors on the drive bay.
- Carefully secure the hard drive in place using any screws or other hardware that is provided with the drive.
- Reinstall any covers or enclosures that were removed during the installation process.
- Plug the server or storage system back into the electrical outlet and power it on.
- Once the system is fully booted, check that the new hard drive is recognized by the system.
- Format the drive and create a partition before using it.
- Make sure to follow the safety precautions provided by the manufacturer and the instruction manual of the device where the hard drive is being installed.
Specifications
Manufacturer : IBM
MPN : 00NA306
Type : Hard Disk Drive (HDD)
HDD Type : SAS-12GBPS
Capacity : 1.8TB
SKU : 00NA306
Extended Specifications
Device Type : Hard Drive – Hot-swap
Hardware Encryption : Yes
Dimension and Weight
Width : 2.8 Inch
Depth : 3.9 Inch
Height : 0.6 Inch
Weight : 0.50 LBS
Performance
Drive Transfer Rate : 1.2 GBPS (External)
Internal Data Rate : 230 MBPS
Spindle Speed : 10K RPM
Miscellaneous
Compliant Standards : Csa, Ul, Tuv, C-tick, Bsmi, Rohs, Emi
Environmental Parameters
Min Operating Temperature : 41 °f
Max Operating Temperature : 131 °f
Humidity Range Operating : 5 – 90%
