Description
Form factor and size
The ProLiant DL360 G10 server has a 1U form factor, which means that it is a rack-mountable server that is 1 rack unit (1U) in height. This makes it a compact and space-efficient option for data centers or other environments where space is at a premium.
The dimensions of the ProLiant DL360 G10 server are:
- Height: 1.68 inches (43mm)
- Width: 17.5 inches (444mm)
- Depth: 27.5 inches (699mm)
It’s important to note that these dimensions include the server’s chassis, power supply units, and any additional components that may be installed. The depth of the server may vary slightly depending on the specific configuration, such as the type and number of storage drives installed.
Additionally, The ProLiant DL360 G10 server is designed to be installed in standard 19-inch EIA-compliant server racks and it comes with HPE Easy Install Rails that facilitate the installation and removal of the server.
Processor Compatibility
The 875552-001 HP CPU System Board PCI Riser Card for ProLiant DL360 G10 is designed to work with a specific range of Intel Xeon Scalable processors. It supports processors with a maximum TDP (Thermal Design Power) of 150 watts and with a maximum of 28 cores per socket.
It’s compatible with the following Intel Xeon Scalable processor families:
- Xeon Scalable 8100
- Xeon Scalable 6100
- Xeon Scalable 5100
- Xeon Scalable 4100
It’s important to keep in mind that not all processors within those families are compatible, you should check the specific processor to ensure compatibility before purchasing or installing it. It’s also recommended to check the HPE website for the latest information on processor compatibility, as the list of supported processors may change over time.
It’s also worth noting that installing a non-compatible processor on the 875552-001 HP CPU System Board PCI Riser Card can cause damage to the server, so it’s important to ensure compatibility before installing any new processors.
Storage Compatibility
The 875552-001 HP CPU System Board PCI Riser Card is compatible with HP ProLiant DL380 G5 and DL385 G5 server models. It is not compatible with other server models or brands. Additionally, this riser card is used to add PCI-Express expansion slots to the server, so compatibility with storage devices will depend on the type of expansion card being used (e.g. RAID controller, HBA, etc.) and the storage devices being connected to it.
Upgrading and Maintenance
Upgrading and maintenance of the 875552-001 HP CPU System Board PCI Riser Card will depend on the specific components and devices that are connected to it. It is important to check the compatibility of any new hardware or software with the current system before making any upgrades or changes.
For example, if the riser card is being used to add a RAID controller, then the RAID controller’s firmware and driver versions will need to be compatible with the server’s operating system and the other devices that are connected to it.
Similarly, if the riser card is being used to add a HBA, then the HBA’s firmware and driver versions will need to be compatible with the server’s operating system and the other devices that are connected to it.
If the riser card is being used to add a network adapter, then the network adapter’s firmware and driver versions will need to be compatible with the server’s operating system and the other devices that are connected to it.
It is important to consult the manufacturer’s documentation and guidelines for proper installation, maintenance and updating of the components and devices connected to the riser card.
Detail Description 875552-001 HP Motherboard For Proliant Dl360 G10:
- Manufacturer Name: HP
- Manufacturer Part Number: 875552-001
- Type: Motherboard
- Sub-Type: Server Boards ProLiant
- Product Type: Server Motherboard
- HP ProLiant (Motherboard) for ProLiant DL360 G10
- HP DL360 G10 Server Board
